ActiveLab™
MULTI-MATERIAL 3D PRINTER
Visual start guide

10. Loading and Printing Job

                                                                             

Navigate to the Jobs tab to access the Test File loaded into the Voxel8 user interface (NCUI). The user is prompted to log in using their email and password for Voxel8 Headquarters (HQ) before the Jobs tab is available.

 

Once the user has logged in, the jobs list from HQ becomes available, along with previous revisions and the date/time of publication as well as a clip of the Rhino scene view.

If the most recently file is not visible, click the 'Refresh' button at the bottom of the window.

 

Once the LOAD button is pressed on the Test File bar, the job is loaded into the NC file tab, where the user can see the print time and print material usage.

The print is started by pressing the PRINT button at the bottom of the window.

For visualizing the print without depositing any material, select DRY RUN prior to pressing the PRINT button.

The user is able to observe the progress bar for the entire job (including time remaining until completion), as well as the progress of each individual operation on the right hand side of the tab.

Once the base layer of polyurethane is printed, a pause occurs in the NC file tab for transfer of the print bed into the inkjet printer.

 

                                                                                                                                      

Have more questions? Submit a request