ActiveLab™
MULTI-MATERIAL 3D PRINTER
Visual start guide

12. Post-Print Processing

                                                                                                                

After the print has been completed on the ActiveLab™ system, it is necessary to cure the media-polyurethane combination for the sample to achieve full mechanical properties. The samples must be transferred to the oven within the first 10 minutes following print completion. 

 

Curing time in the oven is 2 hours at 90 degrees Celsius for ActiveMix Extrusion and 2 hours at 90 degrees Celsius for ActiveMix Spray immediately after print is executed.

The polyurethane will completely cure at room temperature (25 degrees C) after 7 days, but will never exhibit full mechanical properties without oven cure. 

 

Do not touch the uncured polyurethane without PPE, even if sample appears cured. 

 

                                                                                                                

Have more questions? Submit a request