ActiveLab™ has a wet mass of 700 kg and footprint of 20 sq. ft., which will result in average floor loading of 3.7 kPA or 78.5 PSF, and should be placed on a surface with adequate load capacity.
The ActiveLab™ system is leveled using the 4x castors on the wheels and should be done using 2x levels placed on the the base plate of the printer: one on the front edge and the other on either of the side edges.
The castors are first hand-tightened, with the additional option of tightening using a hook spanner wrench.
Ensure that all four feet are raised by castors so that the wheels do not touch the floor of the facility.