ActiveLab™
MULTI-MATERIAL 3D PRINTER
Visual start guide

Emergency Stop (E-stop)

The emergency stop button is present on the Voxel8 user interface (NCUI) panel in case of the following emergencies:

  • Printhead crashing into print bed (caused by incorrect scan)
  • Incorrect location for nest 
  • Incorrect location for wipe operations
  • Motor stalling during homing

Once the E-stop button is pressed, the power to all moving components is interrupted, including the gantry, printhead components, lights, etc. 

To resume printer operation after failure analysis, turn the E-stop button to release it, and press the RESET button to bring back power to the machine.

Have more questions? Submit a request