Visual start guide

Thickness Shift

The thickness shift is a control available through the Voxel8 user interface (NCUI) in the print control panel.

The user can change the print height from the set media plane once a job has started by pressing the - or + button, incrementally changing the nozzle height by 0.05mm.

The user can use the media thickness shift to make up for any errors encountered when setting media thickness through a scan or manually. 



The user can RESET the value of the thickness shift to default back to the original set substrate thickness, or INCORPORATE SHIFT in the Media Thickness section of the settings tab.  

Have more questions? Submit a request