ActiveLab™
MULTI-MATERIAL 3D PRINTER
Visual start guide

Wipe

The wipe command is executed automatically at the end of each print to scrape any cured material off the outside of the nozzle and prepare the ActiveLab™ machine for the next job.

The wipe command differs between ActiveMix™ Extrusion and ActiveMix™ Spray

For extrusion, the nozzle passes around the spinning brushes on the cleaning station twice to remove the polyurethane from the tip.

For spray, the nozzle assembly navigates to the sponge section of the cleaning station and complete two circles around the spinning sponge (saturated with DMSO). 

 

Advanced users may execute the wipe command independently through the SPECIAL COMMANDS section of the manual tab on the Voxel8 User Interface (NCUI). Otherwise, wipe is executed automatically after each print. 

mceclip0.png

 

See also:

 

Have more questions? Submit a request