Visual start guide


The airknife function removes print material and purge material from the tip of the nozzle using pressurized air in the nest, located at the cleaning station section of the ActiveLab™ printer.

This command is executed automatically during a print after the starting ratio of polyurethane is primed, and at the completion of the print once the mixing chamber has been purged.

The advanced user can also choose to execute it through the manual tab during troubleshooting.

The airknife cannot remove cured material from the nozzle, so the wipe operation must be used after the completion of the airknife command post-print.


See also:

Have more questions? Submit a request