ActiveLab™
MULTI-MATERIAL 3D PRINTER
Visual start guide

Preconditioning

In order to prevent print materials from separating or crystallizing during storage or over a period of prolonged use on the ActiveLab™ system, they must be preconditioned: held for 30 minutes at 50 degrees Celsius once a week when in use. Keeping materials at elevated temperature for longer than 30 minutes may result in premature separation. 

This applies to both large (32oz) cartridges on the remote pumping assembly and small (6oz) cartridges on local pumping

Preconditioning must be completed with the cartridge lid removed from the cartridge, but with the outlet cap still screwed into the inlet of the cartridge. 

 

See also:

Material Storage

Have more questions? Submit a request