Visual start guide

05. Power


ActiveLab™ can be powered by 120V AC or 230V AC at 50 or 60 Hz, needs 400W of power, and must be grounded at all times.


Power supplied to ActiveLab™ is used to operate the gantry motion axis, printhead pumps, solenoids, and E-stopIt is also routed to the Voxel8 User Interface (NCUI) to control the movement of the printhead on the gantry and execute material pump extrusion.


An uninterrupted power supply (UPS) is connected to the circuit to provide enough power during an emergency power out to complete a shut down procedure safely and enter the idle state.



Have more questions? Submit a request