Visual start guide

01. ActiveLab™ Startup


Check that ActiveLab™ is connected to power and house air. If not, see Printer Installation section for connection instructions).

Turn on the machine by pressing the green POWER ON button found on the front face (center) of the Voxel8 user interface (NCUI) panel.



Ensure that all doors on the machine are closed so the environmental control inside the printer can automatically be brought to the acceptable humidity and temperature.

All doors are automatically locked and the machine pressure is activated for airknife operation and pumping pressure.

The NCUI will activate and initialize, prompting the user to home the printhead in the settings tab prior to first-time use. 

The same startup procedure should be completed if the machine is disconnected from power. 



Have more questions? Submit a request