ActiveLab™
MULTI-MATERIAL 3D PRINTER
Visual start guide

Autoclean

The autoclean operation cleanses the mixing body of any curing print materials. It automatically takes place at the end of each job or after a period of idleness, or can be executed by the user through manual, MDI, or NC File tabs. 

The printhead is guided to the nest, at which point the mixing body is primed with non-curing print materials, and then purged with purge material, followed by priming the isocyanate component of the system and a final purge.

After this process, the nozzle is cleaned off with an airknife

 

See also:

Have more questions? Submit a request